MAXIGAS

Make nitrogen on site from your compressed air supply High flow capacity to over 100 Nm³/hr Nitrogen purity 97% to 99.999% Ideal for: Chemical Blanketing Modified Atmosphere Packaging Heat Treatment Electronics Manufacture Plastic Injection Moulding   Don't buy nitrogen... make it!

1.	Use your existing compressed air supply or a dedicated air compressor
2.	PNEUDRI pre-treatment package guarantees clean, dry air supply to the nitrogen generator
3.	MAXIGAS nitrogen generator removes oxygen from the air supply, producing nitrogen at purities from 97% to 99.999%
4.	Nitrogen buffer vessel ensures stable, pulse free nitrogen flow

Nitrogen outlet flowrate - Nm³/hr (ATP) v Oxygen content
MODEL	10ppm	100ppm	0.1%	0.5%	1%	2%	3%
N2MID350*	0.6	1.0	1.6	2.6	3.1	4.0	N/A
N2MID600*	0.9	1.5	2.6	3.9	4.6	6.1	N/A
N2MAX104	1.3	2.2	4.5	7.6	9.0	11.8	13.8
N2MAX106	1.9	3.2	6.7	11.4	13.5	17.7	20.7
N2MAX108	2.6	4.4	9.0	15.3	18.0	23.6	27.6
N2MAX110	3.2	5.3	11.3	19.1	22.6	29.5	34.5
N2MAX206	3.9	6.4	13.5	22.9	27.1	35.4	41.4
N2MAX208	5.2	8.8	18.0	30.6	36.1	47.3	55.2
N2MAX210	6.5	10.6	22.6	38.2	45.2	59.1	69.0
N2MAX310	9.6	15.9	33.9	57.3	67.8	88.5	103.5
N2MAX410	12.8	21.2	45.2	76.4	90.4	118.0	138.0

Figures based on 6barg / 87psig air inlet pressure, 20°C-25°C / 68°F-77°F ambient temperature.
Consult factory for performance under specific conditions.
*N2MID generators also available with integral air compressor.

Nitrogen outlet pressure:	5 barg
Minimum air inlet pressure:	6 barg
Maximum air inlet pressure:	9.5 barg
Inlet air quality:	-40°C dewpoint Particulate <0.1 micron Oil <0.01 mg/m³
Electrical supply:	220V / 1ph / 50Hz or 110V / 1ph / 60Hz
Ambient temperature range:	5°C - 45°C
Inlet / outlet connections:	G½

• Oxygen analyser for continuos monitoring of nitrogen purity
• Flow verification kit
• Analogue output for remote monitoring
• Alarm connections